Skip to main content
Skip to main content

Auto Partition

AUTO PARTITION

SinceVersion 2.1

The Auto Partitioning feature supports automatic detection of whether the corresponding partition exists during the data import process. If it does not exist, the partition will be created automatically and imported normally.

Usage Scenarios​

The auto partition function mainly solves the problem that the user expects to partition the table based on a certain column, but the data distribution of the column is scattered or unpredictable, so it is difficult to accurately create the required partitions when building or adjusting the structure of the table, or the number of partitions is so large that it is too cumbersome to create them manually.

Take the time type partition column as an example, in the Dynamic Partition function, we support the automatic creation of new partitions to accommodate real-time data at specific time periods. For real-time user behavior logs and other scenarios, this feature basically meets the requirements. However, in more complex scenarios, such as dealing with non-real-time data, the partition column is independent of the current system time and contains a large number of discrete values. At this time to improve efficiency we want to partition the data based on this column, but the data may actually involve the partition can not be grasped in advance, or the expected number of required partitions is too large. In this case, dynamic partitioning or manually created partitions can not meet our needs, automatic partitioning function is very good to cover such needs.

Suppose our table DDL is as follows:

CREATE TABLE `DAILY_TRADE_VALUE`
(
    `TRADE_DATE`              datev2 NOT NULL COMMENT 'δΊ€ζ˜“ζ—₯期',
    `TRADE_ID`                varchar(40) NOT NULL COMMENT 'δΊ€ζ˜“ηΌ–ε·',
    ......
)
UNIQUE KEY(`TRADE_DATE`, `TRADE_ID`)
PARTITION BY RANGE(`TRADE_DATE`)
(
    PARTITION p_2000 VALUES [('2000-01-01'), ('2001-01-01')),
    PARTITION p_2001 VALUES [('2001-01-01'), ('2002-01-01')),
    PARTITION p_2002 VALUES [('2002-01-01'), ('2003-01-01')),
    PARTITION p_2003 VALUES [('2003-01-01'), ('2004-01-01')),
    PARTITION p_2004 VALUES [('2004-01-01'), ('2005-01-01')),
    PARTITION p_2005 VALUES [('2005-01-01'), ('2006-01-01')),
    PARTITION p_2006 VALUES [('2006-01-01'), ('2007-01-01')),
    PARTITION p_2007 VALUES [('2007-01-01'), ('2008-01-01')),
    PARTITION p_2008 VALUES [('2008-01-01'), ('2009-01-01')),
    PARTITION p_2009 VALUES [('2009-01-01'), ('2010-01-01')),
    PARTITION p_2010 VALUES [('2010-01-01'), ('2011-01-01')),
    PARTITION p_2011 VALUES [('2011-01-01'), ('2012-01-01')),
    PARTITION p_2012 VALUES [('2012-01-01'), ('2013-01-01')),
    PARTITION p_2013 VALUES [('2013-01-01'), ('2014-01-01')),
    PARTITION p_2014 VALUES [('2014-01-01'), ('2015-01-01')),
    PARTITION p_2015 VALUES [('2015-01-01'), ('2016-01-01')),
    PARTITION p_2016 VALUES [('2016-01-01'), ('2017-01-01')),
    PARTITION p_2017 VALUES [('2017-01-01'), ('2018-01-01')),
    PARTITION p_2018 VALUES [('2018-01-01'), ('2019-01-01')),
    PARTITION p_2019 VALUES [('2019-01-01'), ('2020-01-01')),
    PARTITION p_2020 VALUES [('2020-01-01'), ('2021-01-01')),
    PARTITION p_2021 VALUES [('2021-01-01'), ('2022-01-01'))
)
DISTRIBUTED BY HASH(`TRADE_DATE`) BUCKETS 10
PROPERTIES (
  "replication_num" = "1"
);

The table stores a large amount of business history data, partitioned based on the date the transaction occurred. As you can see when building the table, we need to manually create the partitions in advance. If the data range of the partitioned columns changes, for example, 2022 is added to the above table, we need to create a partition by ALTER-TABLE-PARTITION to make changes to the table partition. If such partitions need to be changed, or subdivided at a finer level of granularity, it is very tedious to modify them. At this point we can rewrite the table DDL using AUTO PARTITION.

Grammar​

When building a table, use the following syntax to populate CREATE-TABLE with the partition_info section:

  1. AUTO RANGE PARTITION:

    AUTO PARTITION BY RANGE (FUNC_CALL_EXPR)
    (
    )

    where

    FUNC_CALL_EXPR ::= date_trunc ( <partition_column>, '<interval>' )

Note: In version 2.1.0, FUNC_CALL_EXPR does not need to be surrounded by parentheses.

  1. AUTO LIST PARTITION:

    AUTO PARTITION BY LIST(`partition_col`)
    (
    )

Usage example​

  1. AUTO RANGE PARTITION

    CREATE TABLE `date_table` (
        `TIME_STAMP` datev2 NOT NULL COMMENT 'Date of collection'
    ) ENGINE=OLAP
    DUPLICATE KEY(`TIME_STAMP`)
    AUTO PARTITION BY RANGE (date_trunc(`TIME_STAMP`, 'month'))
    (
    )
    DISTRIBUTED BY HASH(`TIME_STAMP`) BUCKETS 10
    PROPERTIES (
    "replication_allocation" = "tag.location.default: 1"
    );

  2. AUTO LIST PARTITION

    CREATE TABLE `str_table` (
        `str` varchar not null
    ) ENGINE=OLAP
    DUPLICATE KEY(`str`)
    AUTO PARTITION BY LIST (`str`)
    (
    )
    DISTRIBUTED BY HASH(`str`) BUCKETS 10
    PROPERTIES (
    "replication_allocation" = "tag.location.default: 1"
    );

Using constraints​

  1. In AUTO LIST PARTITION, the length of the partition name must not exceed 50. This length is derived from the splicing and escaping of the contents of the partition columns on the corresponding rows of data, so the actual allowable length may be shorterοΌ›
  2. In AUTO RANGE PARTITION, the partition function supports only date_trunc and the partition column supports only DATE or DATETIME type;
  3. In AUTO LIST PARTITION, function calls are not supported. Partitioned columns support BOOLEAN, TINYINT, SMALLINT, INT, BIGINT, LARGEINT, DATE, DATETIME, CHAR, VARCHAR data-types, and partitioned values are enum values;
  4. In AUTO LIST PARTITION, a separate new PARTITION is created for each fetch of a partition column for which the corresponding partition does not currently exist.

NULL-valued partition​

Note

As of 2.1.3, Doris supports the following features.

Both LIST and RANGE partitions support NULL columns as partition columns when the session variable allow_partition_column_nullable is turned on. When a partition column actually encounters an insert with a NULL value:

  1. For an AUTO LIST PARTITION, the corresponding NULL-valued partition is automatically created:
mysql> create table auto_null_list(
    -> k0 varchar null
    -> )
    -> auto partition by list (k0)
    -> (
    -> )
    -> DISTRIBUTED BY HASH(`k0`) BUCKETS 1
    -> properties("replication_num" = "1");
Query OK, 0 rows affected (0.10 sec)

mysql> insert into auto_null_list values (null);
Query OK, 1 row affected (0.28 sec)

mysql> select * from auto_null_list;
+------+
| k0   |
+------+
| NULL |
+------+
1 row in set (0.20 sec)

mysql> select * from auto_null_list partition(pX);
+------+
| k0   |
+------+
| NULL |
+------+
1 row in set (0.20 sec)
  1. For AUTO RANGE PARTITION, NULLABLE columns are not supported as partition columns.
mysql>  CREATE TABLE `range_table_nullable` (
    ->      `k1` INT,
    ->      `k2` DATETIMEV2(3),
    ->      `k3` DATETIMEV2(6)
    ->  ) ENGINE=OLAP
    ->  DUPLICATE KEY(`k1`)
    ->  AUTO PARTITION BY RANGE (date_trunc(`k2`, 'day'))
    ->  (
    ->  )
    ->  DISTRIBUTED BY HASH(`k1`) BUCKETS 16
    ->  PROPERTIES (
    ->  "replication_allocation" = "tag.location.default: 1"
    ->  );
ERROR 1105 (HY000): errCode = 2, detailMessage = AUTO RANGE PARTITION doesn't support NULL column

Sample Scenarios​

In the example in the Usage Scenarios section, the table DDL can be rewritten after using AUTO PARTITION:

CREATE TABLE `DAILY_TRADE_VALUE`
(
    `TRADE_DATE`              datev2 NOT NULL,
    `TRADE_ID`                varchar(40) NOT NULL,
    ......
)
UNIQUE KEY(`TRADE_DATE`, `TRADE_ID`)
AUTO PARTITION BY RANGE (date_trunc(`TRADE_DATE`, 'year'))
(
)
DISTRIBUTED BY HASH(`TRADE_DATE`) BUCKETS 10
PROPERTIES (
  "replication_num" = "1"
);

At this point the new table does not have a default partition:

mysql> show partitions from `DAILY_TRADE_VALUE`;
Empty set (0.12 sec)

After inserting the data and then viewing it again, we could found that the table has been created with corresponding partitions:

mysql> insert into `DAILY_TRADE_VALUE` values ('2012-12-13', 1), ('2008-02-03', 2), ('2014-11-11', 3);
Query OK, 3 rows affected (0.88 sec)

mysql> show partitions from `DAILY_TRADE_VALUE`;
+-------------+-----------------+----------------+---------------------+--------+--------------+--------------------------------------------------------------------------------+-----------------+---------+----------------+---------------+---------------------+---------------------+--------------------------+----------+------------+-------------------------+-----------+
| PartitionId | PartitionName   | VisibleVersion | VisibleVersionTime  | State  | PartitionKey | Range                                                                          | DistributionKey | Buckets | ReplicationNum | StorageMedium | CooldownTime        | RemoteStoragePolicy | LastConsistencyCheckTime | DataSize | IsInMemory | ReplicaAllocation       | IsMutable |
+-------------+-----------------+----------------+---------------------+--------+--------------+--------------------------------------------------------------------------------+-----------------+---------+----------------+---------------+---------------------+---------------------+--------------------------+----------+------------+-------------------------+-----------+
| 180060      | p20080101000000 | 2              | 2023-09-18 21:49:29 | NORMAL | TRADE_DATE   | [types: [DATEV2]; keys: [2008-01-01]; ..types: [DATEV2]; keys: [2009-01-01]; ) | TRADE_DATE      | 10      | 1              | HDD           | 9999-12-31 23:59:59 |                     | NULL                     | 0.000    | false      | tag.location.default: 1 | true      |
| 180039      | p20120101000000 | 2              | 2023-09-18 21:49:29 | NORMAL | TRADE_DATE   | [types: [DATEV2]; keys: [2012-01-01]; ..types: [DATEV2]; keys: [2013-01-01]; ) | TRADE_DATE      | 10      | 1              | HDD           | 9999-12-31 23:59:59 |                     | NULL                     | 0.000    | false      | tag.location.default: 1 | true      |
| 180018      | p20140101000000 | 2              | 2023-09-18 21:49:29 | NORMAL | TRADE_DATE   | [types: [DATEV2]; keys: [2014-01-01]; ..types: [DATEV2]; keys: [2015-01-01]; ) | TRADE_DATE      | 10      | 1              | HDD           | 9999-12-31 23:59:59 |                     | NULL                     | 0.000    | false      | tag.location.default: 1 | true      |
+-------------+-----------------+----------------+---------------------+--------+--------------+--------------------------------------------------------------------------------+-----------------+---------+----------------+---------------+---------------------+---------------------+--------------------------+----------+------------+-------------------------+-----------+
3 rows in set (0.12 sec)

A partition created by the AUTO PARTITION function has the exact same functional properties as a manually created partition.

Coupled with dynamic partitioning​

To make the partitioning logic clear, Doris prohibits Auto Partition and Dynamic Partition from working together on a single table. This usage is prone to misuse and should be replaced by a separate Auto Partition function.

caution

In some early versions of Doris 2.1, this feature is not disabled, but is not recommended.

caveat​

  • Like a normal partition table, AUTO PARTITION supports multi-column partitioning, and there is no difference in syntax.
  • If a partition is created during the insertion or import of data and the entire import process does not complete (fails or is cancelled), the created partition is not automatically deleted.
  • Tables that use AUTO PARTITION only have their partitions created automatically instead of manually. The original use of the table and the partitions it creates is the same as for non-AUTO PARTITION tables or partitions.
  • To prevent accidental creation of too many partitions, we use the FE Configuration max_auto_partition_num controls the maximum number of partitions an AUTO PARTITION table can hold. This value can be adjusted if necessary
  • When importing data to a table with AUTO PARTITION enabled, the polling interval for data sent by the Coordinator is different from that of a normal table. For details, see olap_table_sink_send_interval_auto_partition_factor in BE Configuration.
  • In the case of inserting data with insert-overwrite command, if an overwrite partition is specified, the AUTO PARTITION table behaves as a normal table during this process and no new partitions will be created.
Join DiscussionOn This Page
ASF
Resources
Community
Join the community
Copyright Β© 2024 The Apache Software Foundation,Licensed under the Apache License, Version 2.0. Apache, Doris, Apache Doris, the Apache feather logo and the Apache Doris logo are trademarks of The Apache Software Foundation.